RSS Feed
Knowledgebase : TUNING & RELATED > V6 MEMCAL
Yes. The PWR button uses a different set of tables in the tune so that it has different shift points, transmission line pressure, shift times and converter lock/unlock points. Generally from the factory the power mode is designed for towing applicat...
Yes we can. In fact we recommend that when fitting a 82 degree thermostat that the thermofan on/off setting are altered in the tune to suit as this will prevent excessive heat soak in the engine/engine bay. Keeping the engine cooler aids in power...
Given that you have a larger camshaft we wouldn't be able to supply you with a memcal to suit. Please note that our memcals would be able to support all other bolt-on mods.
You either need a memcal or a re-programmed PCM as they are both basically the same thing. From VN to VT the ECU/PCM (Power Control Module) as well as the L67 powered VX/VY models were fitted with a removable chip (MEMCAL) which contains the engine...
NO, we recommend staying with the factory fitted ECU/PCM as these are very tuneable. In fact many of the aftermarket ECU's are primarily designed for max power applications and they don't provide any of the cold start, stop/start driving functions that...
Yes, on models that are supported by our remote tuning service. Please note that you will need larger injectors.
Unfortunately we don't. We supply memcal tunes for our "bolt on" modifications, so custom tuning a stroked engine is recommended.
Unfortunately we don't offer memcal tunes for aftermarket boosted applications.
The memcal (chip) is fitted in the PCM/ECU which is located behind the kick panel on the passenger side under the glove box. First, either disconnect the battery or remove the engine fuse to remove power from the PCM/ECU. Simply remove the kick pane...
We recommend that our tune is run with 98ron. If you were running on old fuel and want to make the change, make sure you empty the tank completely before adding new fuel. The ESP fault is coming on due to the fact that the computer assumes that ther...
We can supply MEMCAL (tunes) to suit all our bolt on modifications except the large MAF which at this stage still requires a full custom tune.
Generally we adjust the fuelling and ignition maps. We can also adjust the transmission shift points for a more performance orientation (except for the 5 speed autos).
You would require the Getrag memcal for your vehicle, as the vehicle speed sensor is different between T5 and Getrag.
The selection of memcal you're after is shown in the link below http://www.maceengineering.com.au/epages/shop.sf/en_AU/?ObjectPath=/Shops/mace/Products/MEM609/SubProducts/MEM609 [1] Links: ------ [1] http://www.maceengineering.com.au/epages/shop.sf/en_...
You can get a tune at any time, even a stock standard engine/car will benefit from a tune. However we recommend that you first complete any engine/transmission modifications you have planned and then get a tune to suit as the benefits will be greate...
No. Unless you have made other mods that caused the engine light to come on; in which case we can tune to turn it off.